Brother Control Center Mac Download 10.8 Updated

Brother Control Center Mac Download 10.8

The latest version of Blood brother ControlCenter2 will allow you to scan multiple documents using the Flatbed and the Software interface. If you lot practice not have the Manual Multi-Page Browse or Continuous Scanning choice within ControlCenter2, you lot will need to update to the latest version of ControlCenter2. Go to: DOWNLOAD AND INSTALL THE SCANNER Driver .

DOWNLOAD AND INSTALL THE SCANNER DRIVER

These steps assume that your motorcar is already connected either locally or over the network and that software has been installed.

1. If the ControlCenter2 software is running, click on information technology and select Quit.

2. For instructions on how to download the Printer Driver & Scanner Driver, refer to the solution:'Download software, drivers, or utilities'

three. Once the download is complete, browse to the downloaded file and double-click the installer bundle icon BrotherTWAIN.pkg.

You may receive a message stating that the driver bundle cannot be opened because it is from an unidentified developer. If this happens, you tin can still open the driver package by completing the following steps:

Hold down the Control-central and click the installer package file.
Choose Open.
Cull Open once again. The installation volition begin.

For more information, refer to: ''xxxxxxx.xxx (file name) can't be opened because it is from an unidentified developer on Macintosh OSX ten.8 or x.9' when installing Brother software'

4. On the welcome screen click CONTINUE.

v. On the software license agreement screen click CONTINUE.

half dozen. When the message appears stating: To continue installing the software you must concord to the terms of the software license agreement. Click AGREE.

seven. On the Standard Install screen click INSTALL.

viii. When prompted, enter your admin countersign to consummate the install.

9. Once the install completes, reboot the Macintosh.

10. Once the estimator reboots, the ControlCenter icon will appear on the pinnacle carte du jour bar to the left of the date and time. Y'all may launch the scanning application past clicking on this icon and pressing Open up.

11. If you are prompted to select your connexion type, do then and click OK.

12. If you are prompted to select your motorcar, click Browse, select your auto from the list and click OK twice.

CONFIGURE THE CONTROLCENTER2 SOFTWARE:

i. Open the ControlCenter by clicking Hard disk => Library => Printers => Brother => Utilities => ControlCenter => ControlCenter. The ControlCenter application will be loaded near the system clock.

two. Click on the ControlCenter icon located in the Task Tray, and so click Open up to launch the program window.

3. Click on Configuration => Browse => and select the scan type that y'all would similar to configure. T he configuration window will appear.

4. Click the Software Push tab to configure the Browse to push within the ControlCenter2 software interface. The Continuous Scanning or Manual Multi-Page Scan choice is just available when using the ControlCenter2 Software interface.

5. Yous tin can configure several scan settings. The configurable settings volition vary depending on which type of scan yous selected. Nether File Blazon select ane of the options which will back up a multi-folio certificate such as PDF (*.PDF) or Tiff Multi-Page (*.tif).

When choosing Secure PDF, y'all have the pick of setting a countersign. Click the central icon next to the file type and specify a password. TIFF format is available every bit Compressed or Uncompressed.

vi . Place a check in Manual Multi-Page Browse or Continuous Scanning. The pick volition vary depending on your version of ControlCenter2.

7. Once you have configured each setting click OK. All subsequent scans will utilise these settings.

8. Now when you scan from the flatbed, you lot will be asked if there are any additional pages after each page is scanned. This setting merely works when scanning using the ControlCenter2 Software interface.